Skip to content
  • Cart
    • No products in the cart.

  • متجر القرية العلمية Scientific Village Store
  • Login / Register
  • متجر القرية العلمية Scientific Village Store
متجر القرية العلميةمتجر القرية العلمية
  • Menu
  • Main
  • Shop
  • Contact Us
  • العربية
  • English
  • Cart

    No products in the cart.

Filter
DHT11 Humidity and temperature Sensor
DHT11 Humidity and temperature Sensor
DHT11 Humidity and temperature Sensor
Home / Sensors

DHT11 Humidity and temperature Sensor

SKU: QA980#182

23 SAR inc. Vat.

Product categories
  • All Electronics Components
    • Regulator
  • Batteries
  • Capacitors
  • Diodes and LEDs
    • Diode Rectifier
    • Light Emitting Diode LED
    • Zener Diodes
  • Fuse
  • Integrated-Circuits IC
  • IoT Internet of Things
  • LCD displays
  • Learning Kits
  • Led Matrix
  • Mechanical Parts
  • MicroBit
  • MicroControllers
  • Motors & Drivers
  • Oscillators
  • other-products
  • Power Supply
  • Prototyping Boards
    • Boards for Arduino
    • Shields for Arduino
  • Raspberry Pi
  • Relays
  • Resistors
    • Photo Resistor LDR
    • Potentiometer-Variable Resistor
    • Resistors 1/4 Watt
  • Sensors
  • Sound components
  • Switches
  • Tools and Devices
  • Transistors
  • Triac,Diac,&SCR
  • Uncategorized
  • Varistor MOVs
  • Wires
  • Description
DHT11 Humidity and temperature Sensor
Overview

The DHT11 is a digital temperature and humidity sensor.  It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and gives out a digital signal on the data pin (no analog input pins needed).

The breakout boardIt comes with 3 jumper wires to make it easier to use.

Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds. Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity, but its smaller and less expensive.

Comes with a 4.7K or 10K resistor, which you will want to use as a pullup from the data pin to VCC. If you want multiple sensors, each one must have its own data pin!

Specifications

  • Low cost
  • 3 to 5V power and I/O
  • 2.5mA max current use during conversion (while requesting data)
  • Good for 20-80% humidity readings with 5% accuracy
  • Good for 0-50°C temperature readings ±2°C accuracy
  • No more than 1 Hz sampling rate (once every second)
  • Body size 15.5mm x 12mm x 5.5mm
  • 4 pins with 0.1″ spacing

Related products

DHT22 Humidity sensorDHT22 Humidity sensor
+

All Electronics Components

DHT22 Humidity sensor

57 SAR inc. Vat.
IR Remote Control+Receiver ModuleIR Remote Control+Receiver Module
+

All Electronics Components

IR Remote Control+Receiver Module

37 SAR inc. Vat.
MAX6675 Module + Thermocouple SensorMAX6675 Module + Thermocouple Sensor
+

All Electronics Components

MAX6675 Module + Thermocouple Sensor

75 SAR inc. Vat.
Microphone Sensor – Sound Detection Module for ArduinoMicrophone Sensor – Sound Detection Module for Arduino
+

All Electronics Components

Microphone Sensor – Sound Detection Module for Arduino

41 SAR inc. Vat.
IR LED and IR Photo-diodeIR LED and IR Photo-diode
+

All Electronics Components

IR LED and IR Photo-diode

6 SAR inc. Vat.
MQ-2 gas sensorMQ-2 gas sensor
+

All Electronics Components

MQ-2 gas sensor

33 SAR inc. Vat.
load cell 1KG
+

All Electronics Components

load cell 1KG

41 SAR inc. Vat.
TCRT5000 Reflective Switch SensorTCRT5000 Reflective Switch Sensor
+

All Electronics Components

TCRT5000 Reflective Switch Sensor

12 SAR inc. Vat.
سياسة الخصوصية    اتفاقية وشروط الاستخدام   

سياسة الارجاع والاستبدال

All prices are inclusive of VAT. Tax.

Copyrights @ Scientific Village Store 2024
  • Main
  • Shop
  • Contact Us
  • العربية
  • English
  • Login

Login

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

  • العربية
  • English