3.5 inch touch LCD for Raspberry Pi

Description

• 3.5inch standard display, support HDMI input, refresh rate above 60FPS
• Physical resolution 480×320, configurable software resolution up to 1920×1080
• It is compatible with mainstream mini PC such as Raspberry Pi, BB Black, Banana Pi
• It can also be used as a general-purpose HDMI display, connecting computers, TV boxes, Microsoft Xbox360, SONY PS4, Nintendo Switch and so on
• Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, Win10 IOT, single-touch, free drive
• Work as a PC monitor, support Win7, Win8, Win10 system (No touch Function)
• Support HDMI audio output,Backlight brightness can be adjusted
• CE, RoHS certification

DRIVER

How to Install

1. Install Raspbian OS (If you have installed, you may skip this step)

• Download official Raspbian-Jessie image from Raspberry Pi official website
• Download Etcher or other tools to burn image to your SD card

2. Clone this repo into your pi, open LX Terminal and enter following commands:

  $ git clone https://github.com/goodtft/LCD-show.git
  $ sudo chmod -R 755 LCD-show
  $ cd LCD-show/

3. According to your LCD’s type, execute:

• 3.5″ LCD – $ sudo ./LCD35-show
• 5″ LCD – $ sudo ./LCD5-show
• 7inch(B)-800X480 RPI LCD – $ sudo ./LCD7B-show
• 7inch(C)-1024X600 RPI LCD – $ sudo ./LCD7C-show
• Original HDMI display – $ sudo ./LCD-hdmi

4. Wait a few minutes, the system will restart automatically.
5. If you are using Raspbian image version 2017-03-02 or later, you need to execute these additional 2 commands below after step 4 to allow calibration of resistive touch screen. Then reboot the system.

  $ cd LCD-show
  $ sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
  $ sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
  $ sudo reboot

6. Enjoy the LCD!

Parameters

 

• Size: 3.5(inch)
• SKU: MPI3508
• Physical Resolution: 480×320(dots)
• Software adjustable resolution: 480×320~1920×1080(dots)
• Touch: Resistance Touch
• Power Dissipation: 0.20A*5V (Brightness @100%)

0.15A*5V (Backlight close)

• Product Size: 85.5*60.6(mm)
• Package Size: 143*134*51 (mm)
• Rough Weight(Package containing): 142(g)

Hardware Description

①Backlight button: backlight brightness adjustment button, short press backlight changes by 10%, long press 3 seconds to close backlight

②HDMI interface: HDMI signal input interface

③Amplifier interface: HDMI audio output interface

④USB power supply interface: provide power for ordinary display (5V 1A)

⑤Transaction raspberry pie 26PIN base: gets power and return touch from this area when used as a raspberry pie monitor