Latest CNC Shield Version 3.0 for Arduino.<\/p>\n
GRBL 0.9 compatible. (Open source firmware that runs on an UNO for Arduino that turns G-code commands into stepper signals)<\/p>\n
PWM Spindle and direction pins<\/p>\n
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a \u00a0full 4th axis with custom firmware using pins D12 and D13)<\/p>\n
2 x End stops for each axis (6 in total)<\/p>\n
Coolant enable<\/p>\n
Uses removable A4988 or DRV8825 compatible stepper drivers<\/p>\n
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to \u00a01\/32 micro-stepping )<\/p>\n
Compact design.<\/p>\n
Stepper Motors can be connected with 4 pin molex connectors or soldered in place.<\/p>\n
Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)<\/p>\n
Please note that this is an unassembled kit and Basic soldering skills are needed.<\/p>\n
A4988 Stepper Motor Driver:<\/strong><\/p>\n A4988 Stepper Motor Driver Board is a breakout board for Allegro\u2019s A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefully before using this product.<\/p>\n Low RDS (On) Output<\/p>\n Automatic current decay mode \u00a0detection \/ selection<\/p>\n Mix with slow current decay modes<\/p>\n Synchronous rectification for low power dissipation<\/p>\n Internal UVLO<\/p>\n Crossover-current protection<\/p>\n 3.3 and 5 V compatible logic supply<\/p>\n Thermal shutdown circuitry<\/p>\n Ground fault protection<\/p>\n Load short-circuit protection<\/p>\n Five selectable step modes: full, \u00a01\/2, 1\/4, 1\/8 and 1\/16<\/p>\n Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble).<\/p>\n Package Includes:<\/strong><\/p>\n 1 x CNC Shield Board<\/p>\n 4 x A4988 Stepper Motor Driver<\/p>\n","protected":false},"excerpt":{"rendered":" Latest CNC Shield Version 3.0 for Arduino. GRBL 0.9 compatible. (Open source firmware that runs on an UNO for Arduino that turns G-code commands into stepper signals) PWM Spindle and direction pins 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a \u00a0full 4th axis with custom firmware using pins D12 and D13) […]\n","protected":false},"featured_media":20438,"template":"","meta":[],"product_cat":[210,160,164],"product_tag":[],"_links":{"self":[{"href":"https:\/\/qariya.net\/en\/wp-json\/wp\/v2\/product\/1530"}],"collection":[{"href":"https:\/\/qariya.net\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/qariya.net\/en\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qariya.net\/en\/wp-json\/wp\/v2\/media\/20438"}],"wp:attachment":[{"href":"https:\/\/qariya.net\/en\/wp-json\/wp\/v2\/media?parent=1530"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/qariya.net\/en\/wp-json\/wp\/v2\/product_cat?post=1530"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/qariya.net\/en\/wp-json\/wp\/v2\/product_tag?post=1530"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}